Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Kenmore?
Most garage door work in Kenmore runs between $150 and $600, and a standard repair visit typically lands in that band. Spring repair costs $180 – $340 for a single spring, opener repair runs $120 – $320, and a full new door installation is a separate, larger project at $700 – $2,200. The written estimate we give you after looking at the door sets the final price.
We’re a garage door specialist, not a general handyman outfit. Garage doors are all we do, and we work on the brand already in your garage: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Our technicians have up to 13 years of experience, and estimates are free. Call (844) 685-3487 and we’ll get a number to you fast.
Key Takeaways
- Typical garage door repair in Kenmore: $150 – $600.
- Single spring replacement: $180 – $340. A matched pair usually gets replaced together, so a pair runs about twice that.
- New door installation: $700 – $2,200, depending on door size and material.
- Parts on hand, not on order. We stock and supply garage door components directly, so you’re not waiting days for a third-party shipment.
- Estimates are free and the written quote is the price.
Garage Door Cost Breakdown (2026)
Here’s how the numbers break down for Kenmore. These are typical estimated ranges for each job type, not exact figures. Your written estimate after we see the door is what governs.
| Service | Typical Estimated Cost |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
The lead range for a Kenmore garage door job is $150 – $600, and that covers the majority of what we get called out for: a snapped spring, a door that came off its track, an opener that stopped responding. Repairs sit at the lower end when it’s a single worn part and climb toward the top when several components fail at once or the door needs a full rebalance.
Installation is its own budget. A new door at $700 – $2,200 depends mostly on door size, material, and whether the existing hardware can be reused. Opener installation is $250 – $550 on top of the door itself if you’re replacing both.
What pushes a bill up: doors that have been out of adjustment for a while, so more than one part went bad together; a spring that fails and takes a cable with it; and older hardware that no longer matches current components. What keeps it down: catching a problem early. A door that’s been making noise for weeks is usually a cheaper fix than one that’s been making noise for months.
What Affects Garage Door Pricing in Kenmore
Pricing in Kenmore isn’t random. A handful of factors move the number, and knowing them helps you understand your estimate.
- Which part failed. A roller at $110 – $220 and a torsion spring job at $180 – $340 are very different jobs. Springs and cables sit higher because they’re high-tension, safety-critical work that needs trained, equipped technicians. Rollers and tracks are lower because they’re simpler.
- Spring count. Most residential doors carry two springs. When one breaks, the other has usually taken the same wear, so a matched pair is typically replaced together. That pair costs about twice the single-spring range.
- Door and opener brand. We’re factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, which matters because parts and diagnostic routines differ by platform. Familiarity keeps labor time down and cuts callbacks.
- Parts availability. We stock and supply garage door parts directly. That shortens a job that might otherwise stall while a competitor orders a component and waits.
- Local weather and wear. Kenmore sits near Lake Washington and the Sammamish River, and the wet, cool stretches of the year put steady wear on steel doors, hinges, and rollers. Damp air works on the metal, and doors that sit in it season after season show it in the moving parts. Catching rusted or stiff hardware early keeps a small fix small.
- Access and door size. A standard single-car door is a simpler job than a wide double door or one with limited clearance around the tracks. Size affects material cost on panel and full-door work.
How to Save on Garage Door
You don’t need a coupon to keep the bill reasonable. A few habits do more than any promotion:
- Fix the small thing first. A noisy roller or a door that’s slightly off track is a $110 – $240 fix. Ignore it and the same door can turn into a spring and cable job at a much higher number.
- Replace springs as a pair. If one spring just broke, the other is at the same wear point. Replacing them together costs more up front than one, but it avoids a second service call just weeks later.
- Keep the door balanced and lubricated. A door that lifts easily by hand puts less strain on the opener and springs. If it feels heavy or jerky, get it looked at before something lets go.
- Ask about the opener before replacing the door. Sometimes a door is fine and the opener is the problem. Repairs run $120 – $320; a full opener swap is $250 – $550. Get the diagnosis right before you spend on a door.
- Get a free estimate. We’ll look at the door, tell you what’s actually wrong, and give you a written number. Call (844) 685-3487. There’s no charge for the estimate and no pressure to book on the spot.
Repair or Replace: Which Makes Sense in Kenmore?
Repair usually wins when the door structure is sound and the problem is a component: a spring, a cable, an opener, a roller. Those jobs sit in the $110 – $340 range and put the door back in service. Replacement makes more sense when the door itself is failing, panels are bent or rusted through, or the hardware is so worn that repairs keep stacking up. A new door runs $700 – $2,200.
A reasonable rule: if the repair estimate approaches half the cost of a new door and the door is already showing its age, weigh replacement seriously. If the repair is a fraction of a new door and the panels and frame are solid, fix it. We’ll tell you which side of that line your door falls on, honestly, after we look at it.
Why Spring and Cable Work Is a Safety Job
Torsion and extension springs are under extreme tension, and cables hold that tension in line. This is not a DIY fix. A spring that lets go under load can cause serious injury, and the tools and know-how to work on one safely are not things a homeowner should improvise. We say this plainly because it’s true: spring replacement is a professional-only job. Our technicians are trained and equipped for it, and that’s part of why the price is what it is.
If your door is stuck open or closed with a broken spring, don’t force the door or run the opener against it. The opener will strain and can burn out, turning a spring job into an opener job too. Call us and we’ll get it sorted.
Why Brand Familiarity Keeps Your Cost Down
Garage door systems from different makers don’t all behave the same. A LiftMaster opener, a Genie unit, and a Craftsman model each have their own diagnostics, and the door hardware from Clopay, Amarr, Wayne Dalton, and Raynor differs in how it’s sized and adjusted. We work across all eight of those names and we’re factory-familiar with them, so we’re not guessing at unfamiliar hardware when we arrive.
That matters for your bill in a practical way. Fewer diagnostic missteps, fewer return visits, and less time on the job all show up as a tighter estimate. Combined with our parts supply, a repair that might drag across days elsewhere tends to get resolved in one visit here. You can read more about how we handle garage door repair Northgate and the surrounding area if you want a sense of the full service range.
Our reach runs from opener remotes to full door replacement. Whether it’s a smart-home-compatible opener that won’t pair or a door that needs replacing top to bottom, it’s one company and one point of contact, with no subcontracting gaps.
FAQs – Garage Door Cost
How much does garage door repair cost in Kenmore?
Garage door repair in Kenmore typically costs $150 – $600, with most visits landing in that range. A single part replacement sits lower and a multi-component fix sits higher. Call (844) 685-3487 for an exact quote. Estimates are free.
How much does spring repair cost in Kenmore?
Spring repair runs $180 – $340 for one spring. Because most doors carry two springs and they wear together, a matched pair is usually replaced at once, which costs about twice that range. It’s safety-critical work, so it’s not a job to take on yourself. Call (844) 685-3487 to book a free estimate.
Is it cheaper to repair or replace a garage door?
Repair is cheaper when the door structure is sound and only a component failed: $110 – $340 depending on the part. Replacement makes sense when the door itself is worn or damaged, at $700 – $2,200. If the repair is a fraction of a new door’s cost and the panels are solid, repair wins. Call (844) 685-3487 and we’ll tell you which applies to your door.
How much does a new garage door cost in Kenmore?
New door installation typically costs $700 – $2,200, depending on size, material, and whether existing hardware can be reused. Opener installation, if you’re doing both, adds $250 – $550. Call (844) 685-3487 for a written estimate on your door.
Can you come today?
In many cases, yes. Same-day service and fast dispatch from 7am to 7pm are how we handle urgent calls, and a door stuck open or closed tends to get priority. Call (844) 685-3487 early in the day for the best chance at same-day service, and we’ll give you a free estimate when we arrive.
Why does a broken spring cost what it does?
A spring job at $180 – $340 reflects the safety work involved: the spring is under extreme tension, and the technician needs the right tools, training, and care to swap it without injury or damage. It’s a specialist job, and pricing it like a simple handyman repair would be misleading. Call (844) 685-3487 for a free estimate on your specific door.
Get a Free Estimate on Your Kenmore Garage Door
You don’t have to guess at the cost. Tell us what the door is doing and we’ll give you a clear, written estimate for the Kenmore job, whether it’s a spring, a cable, an opener, or a full replacement. We work on the brand already in your garage, parts are on hand rather than on order, and the written quote is the price.
Fast dispatch runs from 7am to 7pm, same-day service is often possible, and every estimate is free. Call (844) 685-3487 today to get your garage door back in working order.
Pricing reflects the Kenmore market as of 2026. Garage Door Repair Northgate offers free estimates – call (844) 685-3487.
What Our Customers Say
"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Lisa Vaughn"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Allison Hayes"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Michelle Chen