Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Northgate?
Spring replacement in Northgate typically costs $180 – $340 for one spring, and most doors have two springs that are replaced together, so a matched pair usually runs about $360 – $680. That range covers the spring, the labor and the safety check on the door afterward. The written estimate you get before any work starts sets the final price.
Springs are the part that fails most often on a residential door, and it’s usually a sudden failure: the door won’t open, or it opens a few inches and stops. When that happens, call us at (844) 685-3487. We offer free estimates and upfront pricing, and the first thing we’ll tell you is which spring type is on your door and what replacing it involves.
Key Takeaways
- One spring: typically $180 – $340. A matched pair is about twice that, because both are almost always replaced at the same time.
- Torsion springs (the ones mounted on a shaft above the door) and extension springs (the ones running along the sides) are priced differently and fail differently.
- Spring replacement is a safety job, not a DIY fix. High-tension springs can cause serious injury if released improperly.
- Free estimates, upfront pricing and a satisfaction guarantee. Call (844) 685-3487 to book one.
Spring Replacement Cost Breakdown (2026)
The table below shows typical estimated ranges for spring work in Northgate. If your door needs more than springs – a frayed cable, a bent track, worn rollers – those items are quoted separately so you can see exactly what each part of the job costs.
| Item | Typical Estimated Range |
|---|---|
| Spring replacement (one spring) | $180 – $340 |
| Spring replacement (matched pair) | about $360 – $680 |
| Cable repair (per cable) | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Panel replacement | $250 – $500 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| General garage door repair | $150 – $600 |
| New door installation | $700 – $2,200 |
What pushes a spring job toward the top of the range? Torsion springs usually cost more than extension springs because they’re heavier, sit under higher tension and take longer to set safely. A door with a broken cable alongside the spring will land higher too, since the cable has to be replaced at the same time. So will a door that needs its tracks realigned or its rollers swapped while we’re in there. A straight spring swap on a standard single-car door is the simplest version of the job.
If you want the full picture of what we do on a door, from a spring to a whole new system, see garage door repair Northgate.
What Affects Spring Replacement Pricing in Northgate
A handful of things move the price up or down. None of them are surprises – we’ll walk you through each before we start.
- Spring type. Torsion springs and extension springs are different animals. Torsion springs mount on a shaft above the door and carry more tension; extension springs run along the horizontal tracks. Torsion work typically costs more because it takes more time and more care to do safely.
- One spring or two. Many homes in Northgate have doors with a matched pair, and if one breaks, the other is usually the same age and under the same wear. Replacing both at once is almost always the smarter call – it costs about double a single spring, but doing one now and the other next month means paying for the same labor twice.
- Door size and weight. A double-car door under a wide opening in a Northgate split-level carries heavier springs than a single-car door. Heavier springs cost more and take longer to install.
- Condition of the cables, tracks and rollers. A spring job is a good moment to look at the rest of the system. If a cable is frayed or a track is bent, fixing it now avoids a second visit later.
- Opener and door hardware. Some older doors have hardware that makes the spring swap more involved. We work on the brand already in your garage – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor – so we’re not guessing at unfamiliar parts.
- Access and ceiling height. A tight garage ceiling or a low-clearance install can add time to the job. We’ll flag it when we see it, before we quote.
One local note: Northgate sits in a wet, cool corner of the Pacific Northwest, and that shows up on garage door hardware. Springs, cables and rollers on doors that face the weather all year tend to show wear sooner than the same parts in a dry climate. That doesn’t change what a spring costs to replace, but it’s one reason we check the whole system while we’re there rather than just swapping the broken part and leaving.
How to Save on Spring Replacement
Springs aren’t a place to cut corners, but there are legitimate ways to keep the bill down.
- Replace both springs together. A matched pair costs about twice a single spring, but it’s cheaper than two separate visits. If both springs are the same age, replacing one and leaving the other is often a false economy.
- Catch it early. A door that’s getting heavy to lift by hand, or an opener that’s working harder than it used to, can be a sign a spring is on its way out. Getting it looked at before it snaps usually means a simpler job.
- Bundle small repairs. If your door also has a worn roller or a slightly bent track, having it done during the spring visit is usually cheaper than booking a second call.
- Keep the door balanced and lubricated. A door that runs smoothly puts less stress on the springs. Lubricating the rollers, hinges and spring coils when the door starts to sound dry is simple maintenance that helps.
- Get the estimate in writing first. Free estimates with upfront pricing mean no surprises on the invoice. Call (844) 685-3487 for yours.
And a word on the temptation to do it yourself: spring replacement is a safety job, not a DIY fix. A torsion spring under tension can release with enough force to cause serious injury, and the tools needed to wind and unwind one safely aren’t the sort of thing most garages have lying around. A trained technician with the right equipment and the right-sized spring is the only sane way to go.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Northgate?
Spring replacement in Northgate typically costs $180 – $340 for a single spring, or about $360 – $680 for a matched pair. Most doors use two springs, and both are usually replaced together. Call (844) 685-3487 for a free written estimate – the quote you get is what you pay.
Can you come today if my spring just broke?
Yes, in most cases we can offer same-day service, with fast dispatch from 7am to 7pm. A broken spring usually means the door won’t open at all, so we treat it as urgent. Call (844) 685-3487 and we’ll tell you what’s available.
Is it cheaper to replace the spring or the whole door?
Replacing the spring is almost always cheaper – $180 – $340 for one spring versus $700 – $2,200 for a new door. A spring replacement makes sense when the door sections, tracks and hardware are still sound. A new door starts to make sense when the panels are dented or the door is near the end of its life. Call (844) 685-3487 and we’ll give you a straight answer on which applies to your door.
Why does a matched pair cost twice as much as one spring?
Because it has two springs in it. A matched pair replaces both springs on the door, and since both are the same age and have taken the same wear, replacing them together is the practical choice. The parts cost about double and the labor is a bit more, so expect roughly twice the single-spring range. Call (844) 685-3487 to confirm the pricing for your door.
Do you charge extra for the estimate?
No. Estimates are free. We’ll look at the door, tell you which spring type you have, confirm whether one spring or a pair needs replacing, and give you an upfront price before any work starts. Call (844) 685-3487 to book a free estimate.
Why Choose Us for Spring Replacement in Northgate
Garage doors are all we do. That matters when the job is a spring, because torsion and extension spring work is high-tension, safety-critical work that general handymen and general contractors usually don’t want to touch. Our technicians are trained and equipped for it, and our technicians have up to 13 years of experience.
We’re factory-familiar with the eight major residential garage door and opener brands – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor – so we work on the brand already in your garage. We also stock and supply garage door parts directly, which means parts on hand, not on order, and fewer callbacks waiting on a third-party delivery. When you combine that with a full range of service, from opener remote to full door replacement, you get one company that can handle the whole job rather than handing parts of it off.
The local pro we connect you with is licensed and insured as their state requires. We offer free estimates, upfront pricing and a satisfaction guarantee, and we can work with your insurer where that helps. Same-day service and fast dispatch from 7am to 7pm apply for urgent spring failures.
If you’re weighing whether a repair is enough, our guide to spring replacement walks through the full process, including how we choose the right spring for your door and what the safety check involves.
Call Garage Door Repair Northgate at (844) 685-3487 for a free estimate, and we’ll get your garage door back to working the way it should.
Pricing reflects the Northgate market as of 2026. Garage Door Repair Northgate offers free estimates – call (844) 685-3487.
What Our Customers Say
"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Lisa Vaughn"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Allison Hayes"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Michelle Chen